*FDA Approved
*ICON 30 Model not available in North America or the EU
Highest Level of Reliability and Safety
- The only company to manufacture, install and service monoplace, dual place and multiplace systems for over 50 years
- The ability to hear, see and monitor the patient during treatment
- Superior electronic voice communications system to ensure clear, dependable two-way communication with patients
- The control module also contains a handset for discreet communication
- Backup power source allows for safe, uninterrupted communication in the event of a power outage
- Pneumatic control panel to ensure safe operation of the system even in the event of power failure
- Adjustable Stryker gurney / stretcher which locks to chamber for safety during patient transfer
Maximum Patient Comfort
- 30″ internal diameter for a compact design
- The world’s highest quality clear acrylic tube at 1.25″ thick
- Adjustable height Stryker patient transfer gurney
- Comfortably accommodates patients up to 500lbs
- Cool and quiet treatment compartment
- Optional TV, radio or recorded audio entertainment system for patient enjoyment
Highlights
- Compact Design
- Sturdy & Robust Chassis Design
- 3.0 ATA Full Depth MONO Capacity
- Easy to Move with Wheel Assist
- EZ Elevator Fit @ 100.5″
- Medical Ports for EKG/BP/IV/TCOM
- Clear, Concise, Control System
Fully Customized Chamber
- Chambers available with left or right hand control and door panel configurations which provide flexibility in the positioning of the system in different locations, and allows two systems to be set up for easy operation by one centrally seated attendant
- Patient monitoring connectors to use with IV pump/ blood as well as pressure/EKG monitoring
- Three Perry Annual Service Plan options to ensure the safest and most cost effective annual service
- Additional service, equipment and accessory options available
Most Cost Effective
Optional accessories to build the chamber that meets your clinical and budgetary requirements
Increased patient compliance produces higher clinical outcome and revenue
Download Sigma Icon 30 Hyperbaric Chamber PDF Brochure
Sigma Icon 30 Hyperbaric Chamber
System Technical Specifications
| Specification | Value | Metric |
|---|---|---|
| Maximum Operating Pressure | 30 psig (66 FSW) | 2.07 bar (3 ATA) |
| Design Temperature | 32°F to 100°F | 0°C to 38°C |
| Oxygen Supply Pressure | 50 to 90 psig | 3.45 to 6.2 bar |
| Oxygen Supply (Peak) Flow | 30 scfm | 8.50 lpm |
| BIBS Supply (Air or O2) Pressure | 50 to 90 psig | 3.45 to 6.2 bar |
| BIBS Supply (Air or O2) Flow | 3.5 scfm | 100 lpm |
| Ventilation Rate | 4.4 to 13.6 scfm | 125 to 385 lpm |
| Pressure Change Rate (approx) | 1 to 5 psi/min. | 0.07 to .34 bar/min |
| Emergency Depressurization Rate | 3 ATA to 1 ATA in 120 sec | – |
| System Pressure Gauge | 0 – 100 ± 3% psi | – |
| Set Pressure Gauge | 0 – 30 ± 0.5% psi | – |
| Chamber Pressure Gauge | 0 – 30 ± 0.5% psi | – |
| Ventilation Gauge | 125 to 385 ± 2% lpm | – |
| Maximum Patient Weight (Gurney) | 500 lb. | 227 kg |
| Overall Length | 100.5 in. | 2.553 meters |
| Overall Width | 40 in. | 1.016 meters |
| Height | 60.5 in. | 1.537 meters |
| Internal Diameter | 30.0 in. | 0.762 meters |
| Internal Length | 85.5 in. | 2.172 meters |
| Internal Volume | 34.9 cu. ft. | 0.99 cu. meters |
| Weight | 2100 lb. | 952 kg |
| Gurney Dimensions | 30.25 x 85.37 x 33.79 in | 768.4 x 2186.4 x 858.3 mm |
| Mattress Dimensions | 21 x 75 x 3.125 in | 533.4 x 1905 x 79.4 mm |
