With the continuing concern of coronavirus COVID-19, we are providing the following guidelines and recommendations for using, cleaning and disinfecting your Perry or Bara-Med hyperbaric chamber.
Recommendations for Chamber Use
- Stagger patient start times by no less than 15 minutes. This will prevent exposing one patient to another in the common area.
- Disinfect the inside and outside of the chamber with Asepti-HB after every patient use.
- Disinfect the sphygmomanometer, thermometer, and other VS equipment after every use. Please view the attached three minute video for complete instructions.
- Tech should be wearing gloves and a mask while working with patients pre/post HBO
Asepti-HB should be an effective disinfectant for Covid-19, since it’s in the coronavirus family, as long as it’s allowed to air dry for at least 10 minutes.
Perry Baromedical Disinfecting and Cleaning Video
To properly maintain your hyperbaric chamber and to minimize risk of infection, it is best practice to clean your hyperbaric chamber after each patient use. The attached video demonstrates the proper cleaning procedure for your hyperbaric chamber and provides information on approved cleaning products. It takes as little as 3 minutes to properly clean your hyperbaric chamber.
If you have any questions regarding this important information, please contact Brenda Cooper at 561-840-0395 or email at firstname.lastname@example.org.
All of us at Perry take this opportunity to wish you and your family good health throughout this COVID-19 pandemic. We are here to support you in any way we can.